WALTHER-WERKE WALLBOX EVOLUTION 350 KEY WITH TWO CHARGING POINT 1X TYPE2 16A/3,7KW UP TO 32A/22KW AND 1X ISOLATED GROUND RECEPTACLE 16A/3,7KW

WALTHER-WERKE WALLBOX EVOLUTION 350 KEY WITH TWO CHARGING POINT 1X TYPE2 16A/3,7KW UP TO 32A/22KW AND 1X ISOLATED GROUND RECEPTACLE 16A/3,7KW

WALTHER Wallbox EVOLUTION 350 of the new product generation in designer aluminum housing for private and semi-public areas. Wallbox with system integration KEY in...

Brand: WALTHER-WERKE
Šifra: 98701032
Dostupnost: Proveriti dostupnost

Trenutno nema na stanju
WALTHER Wallbox EVOLUTION 350
of the new product generation in designer aluminum housing for private and semi-public areas. Wallbox with system integration KEY in stand-alone mode according to the charging of electric vehicles IEC 61851, wired ready for connection, with the following important features and functions: Charging point 1 Charging socket type 2 up to 32A / 22kW, with electromechanical interlock for charging according mode 3, automatic switching over 32A / 22kW to 16A / 11kW, suitable for the used charging cable, Residual current device (RCD) type A, 4-pole 40/0,03A, with accessory device for detecting and shut down by DC fault-current greater than 6 mA, Miniature circuit breaker (MCB) 3-pole 32A C and 3-pole 16A C Charging point 2 Household socket - 16A / 3,7kW, with presence detection during connected plug, Residual current device/Miniature circuit breaker combination (LS / RCBO), 2-pole consisting of (RCD) type A, 16/0,03A and (MCB) 16A C The listed charging points cannot be used at the same time Systems integration KEY in the stand-alone operation On-Off switch of the charging points via key switch Signaling of operating statuses via LED-signal lamp WALTHER basic monitoring via LAN-connection and webbrowser: Displays the status of the charging points Housing made of aluminium, powder-coated corpus pure white (RAL 9010), door, flashback and panel jet black (RAL 9005) Dimensions HxWxD approx. 436 x 330 x 187mm Weight approx. 19kg Degree of protection IP 44 Connecting power max. 22kVA Connecting terminal up to 5x10sqmm Wall mounting assembly inclusive

TECHNICAL DATA

Installation side connection model
3-phase
Number of charging units
2
Max. power per charging point
22 kW
Nominal connection power
22 kW
Width
365 mm
Height
445 mm
Depth
187 mm
Mounting method
Wall mounting
Number of socket outlets Type 2
1
Number of household socket outlets
1
Number of earth leakage circuit breakers type A
1
With circuit breaker
With communication interface
Material housing
Aluminium
Degree of protection (IP)
IP44
Impact strength
IK07

1
2
3
Uporedi proizvode Ukloni sve proizvode