Name: Schneider Electric Variable speed drive ATV310, 0.75 kW, 1 hp, 380...460 V, 3 phase;ATV310H075N4E
Brand: Schneider Electric
SKU: ATV310H075N4E
Price: 30176.40 RSD
Availability: InStock

0 Uporedi proizvode

0 Pogledaj korpu

011 257 1922

Schneider Electric Variable speed drive ATV310, 0.75 kW, 1 hp, 380...460 V, 3 phase;ATV310H075N4E

Variable speed drive ATV310, 0.75 kW, 1 hp, 380...460 V, 3 phase...

Brand: Schneider Electric
Šifra: ATV310H075N4E
Dostupnost: Na stanju

Cena bez pdv-a: 25.147,00

Cena sa pdv-om: 30.176,40

Kolicina:

Variable speed drive ATV310, 0.75 kW, 1 hp, 380...460 V, 3 phase

Main
range of product	Easy Altivar 310
product or component type	Variable speed drive
product specific application	Simple machine
assembly style	With heat sink
device short name	ATV310
network number of phases	Three phase
[Us] rated supply voltage	380...460 V - 15...10 %
motor power kW	0.75 kW
motor power hp	1 hp

Complementary
product destination	Asynchronous motors
quantity per set	Set of 1
EMC filter	Without EMC filter
supply frequency	50/60 Hz +/- 5 %
communication port protocol	Modbus
connector type	RJ45 (on front face) for Modbus
physical interface	2-wire RS 485 for Modbus
transmission frame	RTU for Modbus
transmission rate	4800 bit/s 9600 bit/s 19200 bit/s 38400 bit/s
number of addresses	1…247 for Modbus
communication service	Read holding registers (03) 29 words Write single register (06) 29 words Write multiple registers (16) 27 words Read/write multiple registers (23) 4/4 words Read device identification (43)
line current	3.1 A
apparent power	2.5 kVA
prospective line Isc	5 kA
continuous output current	2.3 A at 4 kHz
maximum transient current	3.5 A for 60 s
power dissipation in W	28.83 W at In
speed drive output frequency	0.5…400 Hz
nominal switching frequency	4 kHz
switching frequency	2...12 kHz adjustable
speed range	1…20
transient overtorque	170…200 % of nominal motor torque depending on drive rating and type of motor
braking torque	Up to 150 % of nominal motor torque with braking resistor at high inertia Up to 70 % of nominal motor torque without braking resistor
asynchronous motor control profile	Sensorless flux vector control Quadratic voltage/frequency ratio Sensorless flux vector control
motor slip compensation	Adjustable Preset in factory
output voltage	380...460 V three phase
electrical connection	Terminal, clamping capacity: 1.5...2.5 mm² (L1, L2, L3, PA/+, PB, U, V, W)
tightening torque	0.8…1 N.m
insulation	Electrical between power and control
supply	Internal supply for reference potentiometer: 5 V (4.75…5.25 V)DC, <10 mA with overload and short-circuit protection Internal supply for logic inputs: 24 V (20.4…28.8 V)DC, <100 mA with overload and short-circuit protection
analogue input number	1
analogue input type	Configurable current AI1 0...20 mA 250 Ohm Configurable voltage AI1 0...10 V 30 kOhm Configurable voltage AI1 0...5 V 30 kOhm
discrete input number	4
discrete input type	Programmable LI1...LI4 24 V 18...30 V
discrete input logic	Negative logic (sink), > 16 V (state 0), < 10 V (state 1), input impedance 3.5 kOhm Positive logic (source), 0...< 5 V (state 0), > 11 V (state 1)