Festo Servo motor EMMT-AS-60-S-HS-RSB ; 5242202

The servo motor EMMT-AS for demanding and dynamic applications is characterized by very good controllability and path accuracy for positioning tasks and the space-saving...

Brand: festo
Šifra: 5242202
Dostupnost: Proveriti dostupnost

Trenutno nema na stanju
The servo motor EMMT-AS for demanding and dynamic applications is characterized by very good controllability and path accuracy for positioning tasks and the space-saving single-cable solution significantly reduces installation effort.

  • For demanding tasks
  • Brushless, permanently excited synchronous servo motor
  • Digital absolute linear potentiometer, single-turn or multi-turn
  • Extremely low resting torque – supports high synchronization even at low rotational speeds
  • Simple connection technology (OCP: One Cable Plug) – one connecting cable for supply and encoder
  • Available with holding brake
Electrical connection 1, connection technology
M23x1
Electrical connection 1, connection type
Hybrid plug
Electrical connection for input 1, connection pattern
00995913
Detent torque
< 1.0% of peak torque
Concentricity, coaxiality, axial runout according to DIN SPEC 42955
N
Mounting position
Any
Rotor position sensor for manufacturer designation
ECI 1118
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Information on max. installation height
with 1,000 m and longer only with derating of -1.0% per 100 m
Contamination level
2
Note on degree of protection
IP65 for motor shaft with rotary shaft seal
IP40 for motor shaft without rotary shaft seal
IP67 for motor housing, incl. connection technology
Note on ambient temperature
Up to 80 °C with derating of -1.5% per degree Celsius
Measuring flange
250 x 250 x 15 mm, steel
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Motor type as per EN 60034-7
IM V3
IM B5
IM V1
Balancing quality
G 2.5
Certificate issuing authority
UL E342973
Electrical connection 1, number of pins/wires
15
Max. winding temperature
155 °C
Brake airflow
0.33 A
Max. brake no-load speed
10000 1/min
Max. installation height
4000 m
Rotor position encoder for DC operating voltage
5 V
Brake coil inductivity
700 mH
Brake coil resistance
52.4 Ohm
Brake current consumption
0.46 A
Max. mechanical speed
16000 1/min
Brake stopping current
0.33 A
Number of pole pairs
5
Storage lifetime, under nominal conditions
20000 h
Brake closing time
10 ms
Max. brake friction work
5600 J
Brake separation time
≤ 35 ms
Electric time constant
2.1 ms
DC brake response delay
≤ 2 ms
Cross inductivity Lq (phase)
15.5 mH
Winding longitudinal inductivity Ld (phase)
13 mH
Rotor position encoder for DC operating voltage range
3.6 V ... 14 V
Standstill torque constant
0.49 Nm/A
Rotor position encoder for absolutely detectable revolutions
1
Rotor position encoder system accuracy angle measurement
-120 arcsec ... 120 arcsec
Thermal resistance
1.5 K/W
Rotor position encoder for positional values per revolution
262144
Thermal time constant
41 min
Type code
EMMT-AS
Rotor position sensor
Absolute encoder, single-turn
Rotor position sensor interface
EnDat® 22
Rotor position sensor measuring principle
Inductive
Temperature monitoring
Digital motor temperature transmission via EnDat® 2.2
Max. rotational speed
12500 1/min
Nominal rotary speed
3000 1/min
Brake DC operating voltage
24 V
Continuous stall current
1.6 A
Brake power consumption
11 W
Motor constants
0.41 Nm/A
Nominal operating voltage DC
565 V
Motor nominal power
190 W
Motor nominal current
1.4 A
Rotor position sensor resolution
18 bit
Phase-phase winding resistance
11.7 Ohm
Winding inductance phase-phase
21 mH
Type of winding switch
Star inside
Peak current
5.4 A
Voltage constant, phase-to-phase
29.9 mVmin
Rating class according to EN 60034-1
S1
CE marking (see declaration of conformity)
As per EU RoHS directive
As per EU EMC directive
As per EU low voltage directive
Corrosion resistance class (CRC)
0 - No corrosion stress
Storage temperature
-20 °C ... 70 °C
Relative air humidity
0 - 90 %
Degree of protection
IP40
Ambient temperature
-15 °C ... 40 °C
Thermal class according to EN 60034-1
F
Certification
c UL us - Recognized (OL)
RCM compliance mark
Total output inertia moment
0.257 kgcm²
Brake holding torque
2.5 Nm
Brake mass moment of inertia
0.074 kgcm²
Nominal torque
0.6 Nm
Peak torque
1.6 Nm
Stall torque
0.66 Nm
Permissible axial shaft load
70 N
Permissible radial shaft load
350 N
MTTF, subcomponent
190 years, rotor position sensor
MTTFd, subcomponent
380 years, rotor position sensor
Switching cycles, holding brake
10 million idle actuations (without friction work!)
Product weight
1500 g
Interface code, motor out
60P
Note on materials
Contains paint-wetting impairment substances
RoHS-compliant
Conforms to standard
IEC 60034
  • 5242202datasheet

    5242202datasheet

  • EMMT-AS ENUS

    EMMT-AS ENUS



1
2
3
Uporedi proizvode Ukloni sve proizvode