Festo Servo motor EMMT-AS-60-L-HS-RMB ; 5242219
The servo motor EMMT-AS for demanding and dynamic applications is characterized by very good controllability and path accuracy for positioning tasks and the space-saving...
Trenutno nema na stanju
The servo motor EMMT-AS for demanding and dynamic applications is characterized by very good controllability and path accuracy for positioning tasks and the space-saving single-cable solution significantly reduces installation effort.
- For demanding tasks
- Brushless, permanently excited synchronous servo motor
- Digital absolute linear potentiometer, single-turn or multi-turn
- Extremely low resting torque – supports high synchronization even at low rotational speeds
- Simple connection technology (OCP: One Cable Plug) – one connecting cable for supply and encoder
- Available with holding brake
- Electrical connection 1, connection technology
- M23x1
- Electrical connection 1, connection type
- Hybrid plug
- Electrical connection for input 1, connection pattern
- 00995913
- Detent torque
- < 1.0% of peak torque
- Concentricity, coaxiality, axial runout according to DIN SPEC 42955
- N
- Mounting position
- Any
- Rotor position sensor for manufacturer designation
- EQI 1131
- Shock resistance
- Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
- Information on max. installation height
- with 1,000 m and longer only with derating of -1.0% per 100 m
- Contamination level
- 2
- Note on degree of protection
-
IP67 for motor housing, incl. connection technology
IP40 for motor shaft without rotary shaft seal
IP65 for motor shaft with rotary shaft seal - Note on ambient temperature
- Up to 80 °C with derating of -1.5% per degree Celsius
- Measuring flange
- 250 x 250 x 15 mm, steel
- Vibration resistance
- Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
- Motor type as per EN 60034-7
-
IM V1
IM B5
IM V3 - Balancing quality
- G 2.5
- Certificate issuing authority
- UL E342973
- Electrical connection 1, number of pins/wires
- 15
- Max. winding temperature
- 155 °C
- Brake airflow
- 0.33 A
- Max. brake no-load speed
- 10000 1/min
- Max. installation height
- 4000 m
- Rotor position encoder for DC operating voltage
- 5 V
- Brake coil inductivity
- 700 mH
- Brake coil resistance
- 52.4 Ohm
- Brake current consumption
- 0.46 A
- Max. mechanical speed
- 16000 1/min
- Brake stopping current
- 0.33 A
- Number of pole pairs
- 5
- Storage lifetime, under nominal conditions
- 20000 h
- Brake closing time
- 10 ms
- Max. brake friction work
- 5600 J
- Brake separation time
- ≤ 35 ms
- Electric time constant
- 3 ms
- DC brake response delay
- ≤ 2 ms
- Cross inductivity Lq (phase)
- 5 mH
- Winding longitudinal inductivity Ld (phase)
- 4.2 mH
- Rotor position encoder for DC operating voltage range
- 3.6 V ... 14 V
- Standstill torque constant
- 0.52 Nm/A
- Rotor position encoder for absolutely detectable revolutions
- 4096
- Rotor position encoder system accuracy angle measurement
- -120 arcsec ... 120 arcsec
- Thermal resistance
- 1.2 K/W
- Rotor position encoder for positional values per revolution
- 524288
- Thermal time constant
- 44 min
- Type code
- EMMT-AS
- Rotor position sensor
- Absolute encoder, multi-turn
- Rotor position sensor interface
- EnDat® 22
- Rotor position sensor measuring principle
- Inductive
- Temperature monitoring
- Digital motor temperature transmission via EnDat® 2.2
- Max. rotational speed
- 11900 1/min
- Nominal rotary speed
- 3000 1/min
- Brake DC operating voltage
- 24 V
- Continuous stall current
- 3.5 A
- Brake power consumption
- 11 W
- Motor constants
- 0.44 Nm/A
- Nominal operating voltage DC
- 565 V
- Motor nominal power
- 410 W
- Motor nominal current
- 3 A
- Rotor position sensor resolution
- 19 bit
- Phase-phase winding resistance
- 2.68 Ohm
- Winding inductance phase-phase
- 7 mH
- Type of winding switch
- Star inside
- Peak current
- 18.3 A
- Voltage constant, phase-to-phase
- 31.2 mVmin
- Rating class according to EN 60034-1
- S1
- CE marking (see declaration of conformity)
-
As per EU RoHS directive
As per EU low voltage directive
As per EU EMC directive - Corrosion resistance class (CRC)
- 0 - No corrosion stress
- Storage temperature
- -20 °C ... 70 °C
- Relative air humidity
- 0 - 90 %
- Degree of protection
- IP40
- Ambient temperature
- -15 °C ... 40 °C
- Thermal class according to EN 60034-1
- F
- Certification
-
RCM compliance mark
c UL us - Recognized (OL) - Total output inertia moment
- 0.49 kgcm²
- Brake holding torque
- 2.5 Nm
- Brake mass moment of inertia
- 0.074 kgcm²
- Nominal torque
- 1.3 Nm
- Peak torque
- 5.6 Nm
- Stall torque
- 1.56 Nm
- Permissible axial shaft load
- 70 N
- Permissible radial shaft load
- 350 N
- MTTF, subcomponent
- 190 years, rotor position sensor
- MTTFd, subcomponent
- 380 years, rotor position sensor
- Switching cycles, holding brake
- 10 million idle actuations (without friction work!)
- Product weight
- 2230 g
- Interface code, motor out
- 60P
- Note on materials
-
RoHS-compliant
Contains paint-wetting impairment substances - Conforms to standard
- IEC 60034