Burkert 2/2-way Angle Seat Control Valve type 2300 ; 203510

Burkert 2/2-way Angle Seat Control Valve type 2300 ; 203510

Excellent combination of good control characteristic and high flow rate Long service life Control units can be mounted directly without external tubing Stainless...

Brand: burkert
Šifra: 203510
Dostupnost: Proveriti dostupnost
Cena na upit
  • Excellent combination of good control characteristic and high flow rate
  • Long service life
  • Control units can be mounted directly without external tubing
  • Stainless steel housing with thread, clamp and weld end connection
In line with Bürkert’s philosophy for modular valves and sensors the construction of Type 2300 angle-seat valve fulfils tough criteria for process environments. Unrivalled cycle life and sealing integrity is guaranteed by the proven self adjusting packing gland. The parabolic trim results in a flow characteristic approximately 35% larger than conventional control valves. It is available in either stainless steel on stainless steel or with a durable PTFE seal for tight shut-off. The design enables the easy integration of automation modules whether they are digital electropneumatic positioner or process controller. The fully integrated system has a compact and smooth design, integrated pneumatic lines, IP65/67, NEMA Type 4X protection class and superior chemical resistance. This system has been engineered for reliable accurate control in applications where high flow rate is an advantage.
Type 2300  
Product sub-group Process control valves  
Actuator version ELEMENT  
Main valve operating principle Angle seat valve  
Valve piloting type Pneumatic  
Nominal pressure min 0 bar
Nominal pressure max 14 bar
Control pressure min 5,5 bar
Control pressure max 7 bar
Control pressure vacuum No  
Temperature environment min -10 °C
Temperature environment max 60 °C
Temperature medium min -10 °C
Temperature medium max 130 °C
Kv value (water) 49 m3/h
Nominal pressure (DIN EN 1333) PN 25  
Nominal Pressure (DIN EN 1759) Class 150  
CIP capable Yes  
SIP capable Yes  
Control function B - normally open (NO)  
Fluidic port connection number 2  
Valve function manual actuation No  
Valve construction Valve complete  
Seat seal material category Plastics  
Seat seal material PTFE (Polytetrafluorethylene)  
Orifice 50 mm
Body nominal size 50 mm
Body nominal size (IN) 2 inch  
Valve body material category Metals  
Valve body material Stainless steel  
Valve raw body manufacture cast  
Valve body surface treatment internal unmachined  
Valve body surface treatment external untreated  
Port connection 1 type Inner thread  
Port connection 1 thread type G  
Port connection 1 thread marking 2  
Flow Below seat  
Installation length 150 mm
Pipe material Stainless steel  
Interface to actuator metric  
Actuator size 90 mm
Actuator material PPS (Polyphenylene sulphide)  
Control air connection material Plastic  
Control air connection type Interface ELEMENT  
Control air connection diameter (mm) 6 mm
Control air connection 1 pre-mounted not equipped  
Control air connection 2 pre-mounted not equipped  
Control air connection position in line direction  
Piston seal material FKM (Fluor rubber)  
Control cone Yes  
Actuator increased chemical resistance No  
O-ring between cover and bush No  
Position monitoring via magnetic piston No  
Position indicator without  
Seal nipple body material Graphite  
Packed seal enclosed No  
Vacuum version No  
Additional manual actuation included No  
Manufacturer´s test certificate 3.1 included No  
Weight 4,300000 kg
Approval type Material-approval-foods  
Certification type Food-EGV1935/2004-compliant  
  • DS2300-8802YGThrea-EU-EN


  • MA2300-Manual-EU-EN


  • MA2300-Quickstart-EU-EN



Electro Pneumatic Solutions d.o.o je osnovan u Srbiji 2014-te godine i posluje preko svojih kancelarija u Beogradu, Novom Sadu i Kraljevu. Sa ponosom ističemo da smo se za ovih 5 godina visoko pozicionirali u sektoru industrijske automatizacije.



  • Daničareva 16/3, 11000 Beograd
  • Radno vreme: Ponedeljak - Petak 09 - 17h
  • Telefon:
  • +381 11 257 1922
  • +381 64 659 66 55
  • +381 62 290 996
  • email: office@ep-solutions.rs

Uporedi proizvode Ukloni sve proizvode